Bulk Bags Melbourne are exclusively made in order to hold one ton or more of material and transport it from one place to another. While unloading bulk bags, the few kilograms left in bulk bags are real money over the month of production. When you are following the right steps and appropriate measures to empty bulk bags, you can significantly save them.
What’s the reason for product Left In Bulk Bags Emptying Process?
The products or materials in the bulk bags get trapped because of common reasons like material bridges or arches in the outlet flow. The chance for product to cling to the fabric or corners of bulk bags is also higher. In some cases, during transportation, the product or material can be compacted and become clumped, which is a hassle in the emptying process. Above all, when the bulk bags collapse inward and pinch off the spout, it can also become the reason for hurdles in emptying bulk bags.
What Are Various Bulk Bag Design Options Which Help With Easy Emptying?
Yes, you can easily empty the bulk bags without any complications by wisely choosing bulk bags like,
Spout bottom: As the name indicates, the spout bottom bulk bags offer full control and dust reduced discharge for the products, and you can easily empty bulk bags.
Full open bottom (duffle): In the full open bottom bulk bag options, you are allowed to open the bottom side of bulk bags, and it results in faster and easier emptying options, especially for coarse materials like sand and gravel.
Baffled (Q-bag) design: Looking at the baffled design Bulk Bags, they usually come in a square shape with four dead corners, which can increase the chance for product and materials to hide.
Inner liners: Whenever you are choosing inner liner Bulk Bags, they come with protective layering, which avoids the clinging of materials in the bags and supports easy emptying of material.
Why You Need to Follow Proper Procedure To Empty Bulk Bags For Easy Discharging?
Even though you are paying additional attention in the selection process of unique Bulks Bags, you need to follow proper procedures for easy material discharge. All you need to do is perform an initial inspection to figure out any tears, damaged loops, or distorted shapes that could cause product leakage. Try to follow the lifting procedure, either with a forklift or hoist and carefully position them in the discharge frame or container. It is always advisable to connect all the spouts to the receiving equipment for proper flow of materials. Once they are connected properly, you can open the spout slowly and release the material with the entire flow at once.
What Are the Most Common Mistakes Made for Wasting Material in Discharge Bulk Bags?
Some mistakes need to be avoided while working with FIBC bags, in order to avoid wastage of materials and save costs. When you decide to release the spout, you shouldn’t perform the action all at once, and leaving the bag lying flat also results in waste of materials. Whenever you are hitting or beating the bags, they do not help with discharge, or they damage the flow of materials. The ignorance of moisture content and skipping the training need to be completely avoided to save costs from bulk bags and materials.
How To Finalise a Quick Checklist for Fully Emptied Bulk Bags?
Once you have completely emptied full bulk bags from Auzzie Turf, you need to perform one last inspection for reuse of bags. All the spouts need to be connected, and dust needs to be controlled in the bulk bags. You can also weigh the leftover product in the bulk bags and inform the corresponding professional to track down waste over time and get it fixed.